Use a Pneumatic Forklift
Pneumatic forklifts are common in shipping and warehouse operations. Also known as pallet trucks or pump trucks, they are utilized in order to transport supplies and products around on wooden pallets using metal forks mounted on a wheeled counterweight. The counterweight contains a pump that lifts the forks off the ground. A pallet truck is designed to be operated by one individual.
To be able to avoid loosing control while raising heavy loads, pallet trucks must always be operated with care. Equipment must be inspected prior to operating. Clear the wheels area of any obstructions. Check that the handle turns smoothly. The pallet should be stacked carefully to guarantee that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level located on the inside of the metal loop in order to release the air in the pump and lower the forks. The forks can then be pushed into the pallet slots. The forks should be at the center to guarantee equal distribution of the pallet's weight across them. Raise the forks from the ground by pumping the pneumatic lift's handle until the pallet has cleared the ground completely. Do not lift the pallet too high or the forklift can unbalance.
Pull on the handle and then drag it behind you if you want to move the pallet. It is really dangerous to push the pallet ahead of you since the momentum could cause it to lose control. Slowly take turns and don't try to stop abruptly. Slowly come to a stop, squeeze the lever, and the forks would lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.