At Hyster, your safety is among our top concerns. This is the reason why we provide a variety of optional safety devices which could be included to your machinery or work place. Following the standards of OSHA, Hyster makes head and work lamps in addition to both audible and visible warning devices.
According to OSHA and ASME B56.1 regulations, the only warning device needed on a forklift is the horn on the steering wheel, that is a basic feature on all forklifts. Even if audible or visible warning devices are not required on all kinds of forklifts, there are several situations where optional warning devices might be suitable. These factors are unique to each work place or work site and each situation should be considered individually.
For audible safety devices, that are most commonly back-up alarms or motion alarms, the main factor to take into account is the noise level made by the alarm. To begin with, the audible device must be able to be distinguished from other types of noises within the work site and the noise must be really loud to be heard in the work location, even if other types of machines could be working. The ability for workers to hear alarms and determine where the noise is originating from can be compromised if employees wear hearing protection devices. If the alarms are too disruptive or offensive to workers, nearby residents, or nearby businesses, alarms may need to be disabled. If noise must be disabled, this should be able to happen readily. Rules must also be followed in order to make certain that noise levels do not go beyond OSHA noise limitations.
For visible safety devices, most commonly strobe, rotating, or flashing lights, numerous points should be considered and thought should be put into whether visible safety devices might be more appropriate compared to audible devices. Operator distraction, workplace lighting and presence of reflective surfaces are all main concerns to take into consideration to make sure that safety devices do not pose a danger to drivers or other workers and are effective. Safety light colours should be different from other lights and background surfaces which are within the work site. Safety device positioning are very important. Lights should be able to clear any overhead obstacles. Light placement should not cause the lights to shine or reflect into the operator's eyes, but shielding of the lights should not excessively obstruct the light's visibility to pedestrians.
To meet many application needs, Hyster has a variety of optional lights that comprise halogen lights and weather-resistant LED. These lights are able to hold up through shock and vibration as well. As for head lamps and work lamps, OSHA has set standards to make working in dark work spaces or at night safer. Directional lighting is required if the lift truck lighting produces less than 2 lumens per square foot. Hyster has lots of choices that will help increase visibility in low-light situations.